Department Profile
Department of Mechanical Engineering was established in 1964. It is currently offering an Undergraduate programme of B.Tech. in Mechanical Engineering with an intake of 60 students. Apart from this it also runs a regular Post graduate of M.Tech. in Computer Aided Design with intake of 18 students. Also it offers two part-time M.Tech. programmes with specializations in Mechanical Engineering Design and Industrial System Engineering with intake of 10 students in each programme. Presently, the Department is also a Quality Improvement Programme (QIP) centre for Ph.D. with two seats along with 01 seat under TEQIP II programme of World Bank. Most of the faculty members are well qualified and have completed their Ph.D. from reputed Institutions. The Department has well equipped laboratory and research facilities to cater to the need of UG and PG programme. Department also extends Testing and Consultancy work for local Industries.
Vision
To produce quality Mechanical Engineers with knowledge, skill and creativity to cater to the needs of the industry and society.
Mission
M-1: To offer academic programmes in tune with the requirements of the industry.
M-2: To undertake research and development activities for solving real life problems.
M-3: To provide conducive environment for promoting creativity and innovation.
Program Educational Objectives (PEOs)
PEO 1: To develop understanding of basic Mechanical Engineering concepts.
PEO 2: To inculcate analytical capabilities for solving real-life problems.
PEO 3: To provide opportunities to work as a team and to develop leadership qualities.
PEO 4: To develop entrepreneurial capabilities.
PEO 5: To encourage and motivate students for self- learning.
Program Specific Outcomes (PSOs)
PSO 1: Ability to apply mechanical engineering knowledge and skill for realistic outcomes.
PSO 2: Capability to identify, formulate, analyze and solve problems in mechanical engineering and allied domains.
PSO 3: Collaborative learning to find out creative, optimal and sustainable solutions.
Programmes
Under Graduate
B. Tech. Mechanical Engineering
Post Graduate
- M.Tech. Mechanical Engineering with Specialization in Computer Aided Design
PhD
Syllabus
Under Graduate
B. Tech. in Mechanical Engineering
Syllabus
- B.Tech. Course Structure & Syllabus w.e.f. 2022-23
- B.Tech. New Course Introduced
- B.Tech. Syllabus changed in subjects
- B.Tech. course related to Employability entrepreneurship skill development
- B.Tech. Syllabus w.e.f. 2019-20
- B.Tech. Course Structure w.e.f. 2019-20
- Old Course Structure B.Tech. Mechanical Engineering
- Old Syllabus B.Tech. Mechanical Engineering
- B.Tech. Syllabus Mechanical Engineering w.e.f. 2017-18
- B.Tech. Course Structure Mechanical Engineering w.e.f. 2017-18
Post Graduate
- M.Tech. (CAD) Course Structure & Syllabus w.e.f. 2023-24
- M.Tech. Syllabus Mechanical Engineering w.e.f. 2019-20
- M.Tech. Course Structure Mechanical Engineering w.e.f. 2019-20
- M.Tech. Syllabus Mechanical Engineering w.e.f. 2017-18
- M.Tech. Course Structure Mechanical Engineering w.e.f. 2017-18
- M.Tech. (Part Time)New Course Structure
- M.Tech. Old Syllabus
PhD
Course structure for PhD program in different specializations.
PhD courses should be taken by students in consultation with their thesis supervisors.
View / Download Faculty Details Year Wise
- View Faculty List 2015-16
- View Faculty List 2016-17
- View Faculty List 2017-18
- View Faculty List 2018-19
View / Download Student Details Year Wise
Laboratories
Laboratories Facility
| S.No. | Name of the Laboratory | Name of the Important Equipment |
|---|---|---|
| 1. | Applied Mechanics & Materials Testing Lab | UTM, Rockwell, Vicker, Torsion, Creep, Charpy/Izod Impact Test, Simple lifting machines, Screw Jack etc., Flywheel |
| 2. | Machine Drawing Lab. | Drawing Boards 60 |
| 3. | Mfg. Sc. & Engg. Lab. I | Lathe Machine CNC |
| 4. | Mfg. Sc. & Engg. Lab. II | EDM ECM |
| 5. | Heat Transfer Lab. | Heat Pump Natural- Convection Forced- Convection Emissivity Vapour Compression System Air condition system Cut section model of Compressor |
| 6. | Energy Conversion Lab. | Different type of
Boiler Model, Turbine Model Diesel Engine Petrol Engine |
| 7. | Dynamics of Machine Lab. | Governor Gyroscope Whirling of Shaft Apparatus Cam follower Slider crank mechanism Brakes and clutch models |
| 8. | Computer Aided Design Lab. | Computer systems (15) i7 / 8GB / 1 TB Windows 8 /10 OS Creo 2.0 Modelling software |
| 9. | Hydraulic Machines Lab. | Pelton Turbine Francis Turbine Kaplan , Centrifugal Pump Test Rig Reciprocating Pump Oil Gear Pump Hydraulic RAM |
| 10. | Measurement & Metrology Lab | Autocollimator Surface Roughness Measuring Instrument Tool Maker Microscope Profile Projector Metallurgical Microscope |
| 10. | Automobile Engineering Lab. | Cut section model of mechanical brake, hydraulic brake, Worm and worm wheel apparatus, cut section models of multi cylinder petrol, engine and multi cylinder diesel engine, Power steering apparatus, Vacuum brake apparatus |
Facilities
View Geo Tagged Images of classrooms
ZNC EDM (ELECTRO-DISCHARGE MACHINE)
3-D PRINTER (INCUBATION HUB)
CNC MACHINE
MICRO HARDNESS TESTER
METAL MATRIX COMPOSITE PRESS
METAL METRIX COMPOSITE FURNACE
View Departmental Facility
View Item Costing
Research/ Project/ Consultancy
| Sr. No. | Year | Title of Project | Sponsoring Agency | Sanctioned amount (Lakhs) | Investigator(s) |
|---|---|---|---|---|---|
| 1. | 2020 | Development of low capacity andl costeffective solar air conditioner (2 years) | CST, UP | 7.78 | Dr Onkar Singh |
| 2. | 2019 | An investigation of solid particle
erosion inl hydraulic turbine using CFD (2 years) | MHRD | 15.32 | Mr Saurabh Sangal & Dr V P Singh |
| 3. | 2018 | Design and development of utility products using recycled waste rubber (3 years) | CST, UP | 11.91 | Dr Anand Kumar & Dr V P Singh |
| 4. | 2017 | Development of Experimental Setup for
Machining and Finishing of Biocompatible Materials for Dental Implant (2 years) | IIT Kanpur (Under DIC,MHRD) | 9.50 | Dr S K S Yadav & Dr V P Singh |
| 5. | 2016 | Development, Experimental study and
Multi-Objective Optimization of Electrical Discharge Drilling (EDD) Process (Under Young Scientist Scheme) (3 years) | DST, Delhi | 28.00 | Dr. S.K.S. Yadav |
| 6. | 2015 | Experimental Study of Drilling Electrochemical
Spark Machining (ECSM) setup (3 years) | CST, UP | 8.00 | Dr. S.K.S. Yadav |
| 7. | 2010 | Adv. Manufacturing Lab, under MODROB | AICTE, New Delhi | 15.00 | Dr Onkar Singh |
| 8. | 2004 | High energy impact analysis of polymer composites (2 years) | DRDO | 5.00 | Dr B K Misra |
| 9. | 2004 | Real time integrity monitoring of
composite structures using magnetostrictive materials (2 years) | AICTE | 10.00 | Dr Anand Kumar & Dr Onkar Singh |
| 10. | 2002 | Experimental investigations on
transpiration cooling for gas turbine blades (2 years) | SERB | 1.20 | Dr Onkar Singh |
| 11. | 2000 | Study on methods of improving the
performance of combined gas and steam turbine plants (2 years) | AICTE | 3.00 | Dr Onkar Singh |
TEQIP, World Bank Seed Money to Faculty Members
| Sr. No. | Year | Title of Project | Sponsoring Agency | Sanctioned amount (Lakhs) | Investigator(s) |
|---|---|---|---|---|---|
| 1. | 2018 | Processing and characterization of carbon-carbon composite materials | TEQIP-III | 1.80 | Dr S K S Yadav |
| 2. | 2018 | Development of portable Electro-discharge machining setup for micro-machining | TEQIP-III | 2.00 | Dr S K S Yadav |
| 3. | 2018 | Fabrication and experimental analysis of novel material for load bearing bio-implants | TEQIP-III | 2.00 | Dr V P Singh |
| 4. | 2018 | Development of thermally spray bio-active
glass based composite coating for load bearing impacts (collaboration with IIT, Kanpur) | TEQIP-III | 1.80 | Dr V P Singh |
| 5. | 2018 | Development of 3-D printer for soft robotics applications | TEQIP-III | 1.80 | Dr J Bhaskar |
| 6. | 2016 | Development of Vibration Assisted Hybrid Machining Setup | TEQIP-II | 2.47 | Dr S K S Yadav |
| 7. | 2015 | Development of MMC setup | TEQIP-II | 1.00 | Dr J Bhaskar & Dr S K S Yadav |
| 8. | 2015 | Development and Experimental study of
electro-chemical discharge machining (ECDM) setup | TEQIP-II | 2.00 | Dr S K S Yadav |
| 9. | 2014 | Development of Electrical Discharge
Diamond Face grinding setup on ZNC Electrical Discharge Machining | TEQIP-II | 2.00 | Dr S K S Yadav |
TEQIP, World Bank Seed Money to Faculty Members
- Done Type-II consultancy for M/s Sunder Engineering Works, Kanpur of Rs. 47000.00 (Forty seven thousand only) in September 2017 by Dr. S.K.S. Yadav and Dr. V.P. Singh.
- Inspection of Aluminum channel used as construction material, 2010 for KDA, Kanpur worth Rs.12,133=00 by Dr. Anand Kumar.
- Inspection of Aluminum channel used as construction material, 2010 for KDA, Kanpur worth Rs.12,133=00 by Dr. Anand Kumar.
- Inspection of Aluminum channel used as construction material, 2010 for KDA, Kanpur worth Rs.12, 133=00 by Dr. Anand Kumar.
- Process certification of Lamplig, 2006 for IEDS, Kanpur worth Rs.25,000=00 by Dr. Anand Kumar.
Achievements
Dr. Anand Kumar, Professor
Name of Award/Honour/Fellowships
- Member, Chartered Management Institute
- Fellow Member, Institution of Engineers’ (India)
- Foreign Countries Visited
I. To attend IV IPS Collaboration Symposium at Waseda University, Kitukyushi, Japan, Nov. 17-19, 2010
II. To attend SPIE Conference on Smart Materials + Nano – & Micro- Systems at RMIT University, Melbourne, Australia, Dec. 8-12, 2008 - Won second prize for poster presentation prize for research paper ‘Structural health monitoring of composite laminate using smart magnetostrictive sensory layer’ at National Workshop on Advanced Functional Materials and Structures, MNIT, Allahabad, July 12-14, 2012.
- Won best poster presentation prize for research paper ‘Delamination detection in composite beam using magnetostrictive materials as sensor’ at International Conference on Recent Advances in Composite Materials, IT-BHU, December, 2004.
Dr. Onkar Singh, Professor
| Name of Award/Honour/Fellowships | Organization | Year |
|---|---|---|
| National Record for development of air turbine engine for running motor bike | LIMCA Book of Records | 2014 |
| National Record as First academicians’ work in US school text book | LIMCA Book of Records | 2015 |
| 100 Most Influential Vice Chancellors Award | World Education Congress | 2016 |
| Asia’s Education Excellence Award – Exemplary Leader award | CMO Asia | 2016 |
| AICTE Young Teacher Career Award | AICTE, New Delhi | 2000 |
Dr. J. Bhaskar, Professor
| Name of Award/Honour/Fellowships | Organization | Year |
|---|---|---|
| SAKURA Fellowship | Japan Science & Technology, JAPAN | February 2019 |
Dr. Vinay Pratap Singh, Associate Professor
| Name of Award/Honour/Fellowships | Organization | Year |
|---|---|---|
| Received the best research paper award for the stream
of Engineering in all India Seminar on Advances in Engineering and Technology for Sustainable Development(AETSD)-2015 | College of Technology, G.B.P.U.A & T. Pantnagar, Uttarakhand | 2015 |
Dr. Vinay Pratap Singh, Associate Professor
| Name of Award/Honour/Fellowships | Organization | Year |
|---|---|---|
| Best Paper Award | National Conf. at G.B.Pant Univ., Pantnagar | 2015 |
| Received Certificate of Appreciation by Director for Good conduction and management in state level program | HBTI | 2015 |
| Young Scientist DST Project | DST New Delhi | 2016 |